Mariner 9 enters into orbit around Mars.
Mariner 9 was an unmanned NASA space probe that contributed greatly to the exploration of Mars and was part of the Mariner program. Mariner 9 was launched toward Mars on May 30, 1971 from Cape Canaveral Air Force Station and reached the planet on November 14 of the same year, becoming the first spacecraft to orbit another planet – only narrowly beating the Soviets’ Mars 2 and Mars 3, which both arrived within a month. After months of dust storms it managed to send back clear pictures of the surface.
Mariner 9 returned 7329 images over the course of its mission, which concluded in October 1972. Mariner 9 was designed to continue the atmospheric studies begun by Mariner 6 and 7, and to map over 70% of the Martian surface from the lowest altitude and at the highest resolutions of any Mars mission up to that point. An infrared radiometer was included to detect heat sources in search of evidence of volcanic activity. It was to study temporal changes in the Martian atmosphere and surface. Mars’ two moons were also to be analyzed. Mariner 9 more than met its objectives.
Under original plans, a dual mission was to be flown like Mariners 6–7, however the launch failure of Mariner 8 ruined this scheme and forced NASA planners to fall back on a simpler one-probe mission. NASA still held out hope that another Mariner probe and Atlas-Centaur could be readied before the 1971 Mars launch window closed. A few logistical problems emerged, including the lack of an available Centaur payload shroud of the correct configuration for the Mariner probes, however there was a shroud in NASA’s inventory which could be modified. Convair also had an available Centaur stage on hand and could have an Atlas readied in time, but the idea was ultimately abandoned for lack of funding.
Mariner 9 was mated to Atlas-Centaur AC-23 on May 9 with investigation into Mariner 8’s failure ongoing. The malfunction was traced to a problem in the Centaur’s pitch control servoamplifier and because it was not clear if the spacecraft itself had been responsible, RFI testing was conducted on Mariner 9 to ensure the probe was not releasing interference that could cause problems with the Centaur’s electronics. All testing came back negative and on May 22, a tested and verified rate gyro package arrived from Convair and was installed in the Centaur.
Liftoff took place on May 30 at 5:23 PM EST. All launch vehicle systems performed normally and the Mariner separated from the Centaur at 13 minutes and 18 seconds after launch.